Tub and Tile Refinishing Kit for Homeowners

A Solution for Reviving Stained Tubs and Tiles: The DIY Tub & Tile Spray-On Refinishing Kit

Are your bathroom fixtures looking worn and stained, despite your best cleaning efforts? The Magic Tub & Tile Refinishing Spray-On Kit offers a cost-effective solution to restore your tubs, sinks, and tiles to a fresh, like-new appearance. This high-performance, single-part epoxy formula is specially designed to withstand moisture and revive the look of your fixtures.

Avoid the hassle and expense of a full remodeling project by refinishing your existing fixtures instead. Even stubborn stains and rust can be effectively covered, leaving you with a bright, clean result that's well worth the time and effort. Each kit covers 35-45 square feet, making it a versatile option for a variety of bathroom surfaces.

Proper Preparation is Key However, achieving the best results with this refinishing kit requires some important prep work. Before you begin spraying, the bathroom area and the surface itself will need to be thoroughly cleaned and prepared as directed in the instructions. This essential step ensures the new finish adheres properly and delivers long-lasting results.

Necessary Supplies In addition to the refinishing kit, you'll need to gather a few other items to complete the project, including: - Safety glasses - Rubber gloves - Abrasive scrubbing pad - Abrasive cleaner - TSP (Trisodium Phosphate) cleaner - Bucket - #400/#600 grit wet/dry sandpaper - Tack cloth - Masking/painters tape - Drop cloth or masking film

Applying the Refinishing Spray For most projects, 2-3 coats of the refinishing spray are sufficient. Be sure to allow the appropriate drying time of at least 30 minutes between coats, and do not apply additional coats more than 6 hours after the first coat. The final coat should be allowed to dry for at least 72 hours before exposing the surface to water.

Ventilation Considerations Proper ventilation is crucial when using this product. Make sure to open windows and/or use fans to ensure the area is well-ventilated before beginning the refinishing process.

Project Timeline The total time required for your refinishing project will depend on the size and condition of the surface. Plan to dedicate at least 2-3 hours for surface preparation and application of the first coat. Most projects will need 2-3 coats, with 30 minutes of drying time between each application. The final coat should be applied within 6 hours of the first coat and allowed to dry for at least 72 hours before water exposure.

The Magic Tub and Tile Refinishing Kit provides a long-lasting finish on a variety of surfaces, including ceramic, porcelain, fiberglass, and more. The included INSL-X Stix Primer is specially formulated to bond to challenging materials like tile, plastic, and metal, allowing for a seamless topcoat application.

product information: